Can’t join WiFi Network of TP Link Repeater

Do you have an issue connecting to your TP Link WiFi network? Don’t panic if you are experiencing an issue while connecting to your TP-Link WiFi network. We have a range of basic and more advanced techniques that can be used to fix the problem. Let’s get started with the troubleshooting steps.

Troubleshooting Solutions

1. Perform a Restart

A new start can help you troubleshoot minor technical issues that could be causing your TP Link extender to not connect to the WiFi network. This is a quick and easy way to increase the performance of your extender. It is recommended that you reboot your TP Link repeater before trying any other techniques. This will clear accumulated space and keep your repeater from overheating. Let’s now move on to the steps for restarting your TP Link repeater.

  • All devices that are connected to the TP-Link repeater should be disconnected
  • Turn off the power source to the repeater and unplug it.
  • After that, wait for a few seconds before reconnecting it to the power socket and turning it on.

Check to see if the problem persists. Continue reading if the issue persists.

2. Verify your WiFi password

Verify that your WiFi password to connect and access the TP Link extender setup page to modify settings is correct. Users often enter the wrong password and have problems. You should be cautious when entering the password for your TP Link repeater WiFi network. Also, double-check what you’ve entered in each field.

3. Verify your Ethernet Connection

Make sure the Ethernet cable that you use to connect your TP Link extender has no wear or tear. You can swap the Ethernet cable if you discover any issues. If that doesn’t work, you might consider a wireless connection.

4. Update Firmware for TP Link

This issue can also be caused by outdated firmware in TP Link firmware. Check the version of your TP Link firmware. You can upgrade to the latest version if it is outdated. You can also update TP Link firmware with the TP Link application.

5. Avoid WiFi Interference

When placing your TP Link extensioner, you should be careful. It should be kept away from any objects, such as cordless phones, refrigerators, baby monitors and Bluetooth speakers that can cause WiFi interference. These objects transmit radio frequencies, which can cause interference in WiFi signals. This could lead to TP Link extender not being able to join the WiFi network. You can check ifvod tv blog to read more information on this topic.

6. Do a Default Factory Recovery

If all your efforts have failed to produce a positive result, this is the last resort. You can fix all kinds of problems by restoring your TP Link extender’s factory settings and re-configuring it from scratch. This isn’t a difficult task, but many netizens find this tedious. We have provided simple steps that will make this task easy.

  • Look for the Reset button at your extender.
  • After you have found the Reset button, press it.
  • It will now restart itself and be returned to factory default mode.

After the restoration is complete, you can configure the extender by going to

This troubleshooting procedure should help you resolve the can’t connect WiFi network of TP Link repeater. Let us know if you have any other methods to resolve the problem by commenting in our comment section.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button